ESP-ME SERIES CONTROLLER
New design and an enhanced feature set of the european’s preferred modular controller
- Program based scheduling allows 4 individual programs with independent start times per program for 24 total start times.
- Advanced diagnostics and short detection with LED alert.
- Total Run Time Calculator by program.
- Smart WiFi Connectivity:
Internet-based weather data adjusts irrigation schedules on a daily basis for up to 30% water savings.
- Large LCD display with easy to navigate user interface.
- Rain Sensor input with override capability.
- Master valve/pump start circuit.
- Non-Volatile (100 year) storage memory.
- Remotely Programmable under 9V battery power (not included)
- Watering schedule options: By days of week, Odd calendar days, EVEN calendar days, or Cyclic (every 1-30 days)
- Contractor DefaultTM Program Save/Restore saved program(s)
- Rain Sensor bypass by Station.
- Total run time calculator by program.
- One Touch manual watering.
- Delay Watering up to 14 days (applies only to stations not set to ignore Rain Sensor)
- Manual Watering option by program or station.
- Seasonal Adjust applied to all programs or individual program.
- Adjustable delay between valves (default set to 0)
- Master valve on/off by station.
- LNK WiFi compatible
IESP4MEEUR: Basic 4-station modular controller. WIFI compatible. Expandable to 22 Stations.
639392: ESP-ME WIFI enabled panel Int.
4 station expandable to 22 stations with optional modules
Number of programs: 4
Automatic starts: 6 per day per program for up to 24 start time
Programming Schedules:
- 7-day weekly
- Even day
- Odd day +/- 31st
- Cyclic
Permanent day off
Station Timing: 1 minute to 6 hours for all station
Delay between stations from 1 sec to 9 hours
Seasonal Adjust: 5% to 200%
Max operating temperature: 65°c
ELECTRICAL SPECIFICATIONS
- Input required: 230VAC – 50Hz Output: 25,5 VAC 1A
- Master Valve/Pump Start Relay
- Max Coil Inrush: 11VA
- Max Coil Holding: 5VA
- Power back-up not required. Non-volatile memory permanently saves the current programming and a 10 year life lithium battery maintains the controllers time and date during power outages.
Width: 27,2 cm
Height: 19,5 cm
Depth: 11,2 cm
ESPSM6: 6 station extension module (not backward compatible with prior models)
RSD-BEx: Rain Sensor
WR2-RC: Wireless Rain Combo sensor
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
It means that you have a programming error. Either there are: no start times, no run times, or no watering days selected. The controller ships from the factory with the following settings:
1 Start time of 8:00 AM, 10 minute run time for the first 4 stations (base module) and all days set to ON.
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
Date/Time is the only setting not reset to the factory ship settings.
Yes, 3 station modules are compatible with the new ESPME.
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
No.
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
Date/Time is the only setting not reset to the factory ship settings.
Yes, 3 station modules are compatible with the new ESPME.
No.
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
Date/Time is the only setting not reset to the factory ship settings.
Yes, 3 station modules are compatible with the new ESPME.
It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.
It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)
Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR
A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.
Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.
Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.
Date/Time is the only setting not reset to the factory ship settings.
Yes, 3 station modules are compatible with the new ESPME.
No.
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
No.
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.
No.
No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.